ATV-3 loading on the way Credit: ESA

ATV-3 loading on the way Credit: ESA

What, exactly, is ATV Edoardo Amaldi hauling up to Station, you ask? Yes: It’s time again for our Big ATV Cargo Post*!

We’ve gathered some updates from the very helpful ATV team at ESA (credits below), and in particular from Kirsten MacDonell, ESA’s ATV Phase E Cargo Integration Engineer at ESTEC and one of the most knowledgeable folks in terms of what’s actually on board.

Our post today is divided into three parts:

  1. A great video from ESA TV highlighting what’s on board
  2. A listing of the more crucial items needed for orbital science on board the ISS
  3. Two tables giving a detailed breakdown of cargo on board by type and mass, including liquid cargo (propellants, gases), dry cargo, experiments, spare parts, expendables, food, crew items, toothbrushes, etc.

There’s a lot of info, so if you’re pressed for time, at least watch the video now and then perhaps refer back when your mates ask, ‘What in heck does that ATV carry, anyway?’ They’ll wonder how you got to be such an expert!

For even more on ATV-3 cargo, journalist Pete Harding and the nice folks over at NASASpaceFlight.com have put together a great ATV-3 cargo update including additional details on how the various cargo items were selected for launch.

Finally*, to compare loads with ATV-2, see our Big Cargo Post of 2011.

Part-1: ATV-3 cargo in video

Part-2: ATV-3 orbital science payloads

From ESA

ATV-3 carries the LSM3 for Biolab (LSM = Life Support Module, 3 = Oxygen) and additional neoprene gloves and an arm gripper for Biolab; there is the ALTEA shield (consists of tiles that will be subjected to radiation), and the ENERGY experiment (consists of food and urine sampling kits). There are also ESEMs (Exchangeable Standard Electronic Modules) that fit as modules into the RPDA (Remote Power Distribution Assembly) housing for the Power Distribution Unit of the European Payload Racks on the ISS.

From JAXA

ATV is carrying a High Definition Camcorder, tapes, cables, etc., for down-linking videos or imagery from the ISS’s Japanese Experiment Module (JEM), also known with the nickname Kibo (きぼう, Kibō = Hope).

From NASA

“NanoRacks Module-16 (NRP-10016)” is a P430 ABSplus Ivory thermoplastic enclosure, with four (4) inserted P430 ABSplus thermoplastic experiment sub-modules within. Each one of the four experiment modules contains a programmable Microcontroller and a Digital Camera plus experiment-specific electronics to monitor and control the experiment. The four experiment modules include the following:

  1. A miniature robot experimen
  2. A bronze and gold electroplating experiment with 50 ml of non-toxic plating solution
  3. A concrete mixing and setting experiment with 50 ml of water
  4. A DH5 Alpha E-coli bacteria growth and Kanamycin antibiotic resistance experiment

“NanoRacks Module-18 (NRP-10018)” is a P430 ABSplus Ivory thermoplastic enclosure, with four (4) inserted P430 ABSplus thermoplastic experiment sub-modules within. Each one of the four experiment modules contains a programmable Microcontroller and a Digital Camera plus experiment-specific electronics to monitor and control the experiment. NanoRacks Module-18’s four experiments consist of:

  1. A plant growth experiment with 50 ml of water — same seeds as CL-10010 (HTV-2 reflight), except qty 1 of each (Wisconsin Fast Plant, Sweet Basil, & Marigold)
  2. A biological growth experiment with a probiotic bacteria called B. Subtilis
  3. A ferrofluid (electromagnetic field) experiment
  4. A 2nd ferrofluid (electromagnetic field) experiment

A ‘VelociCalc’ meter which measures air velocity, temperature, humidity and calculates flow rate. It will allow the on-orbit crew to measure air velocity at inlet/outlet vents, within racks and crew passage ways on the ISS.

The HRF (Human Research Facility) ‘PIG in a Blanket’ is used to supply calibration gas for the HRF VO2max experiment. The PIG gas cylinder is connected via lines and fittings to provide gas for this investigation. The gas composition is 80% Nitrogen, 15% Oxygen and 5% Carbon Dioxide and there are 190 litres of gas at standard temperature and pressure stowed inside.  Total mass is 5 kg and size is 11.6 x 17 x 56.1 cm.

There is also a resupply kit for the Human Research Facility including urine tube kits, wipes, electrodes, bags, echo gel, gauze, needles, etc. All of these are necessary items to conduct HRF experiments even though none of these items are an experiment per se.

Part-3: ATV-3 cargo by mass and type

Fluid Cargo Loading

ATV-3

ATV-2

ATV-1

   Mission Propellant

2261

2030

3598

      ISS Propulsive Support

3150

4535

2260

      Water

285

0

267

      Gas (3 tanks: 2 Oxygen, 1 Air for ATV-3)

100

100

20

      Refuel Propellant

860

850.6

860

Total Fluid Cargo

4395

5486

3407

Dry Cargo Loading

Nominal Load Cargo
      NASA

1572

906

966

      ESA

25

189

184

Late Load Cargo
      NASA

428

402

No late load for ATV-1

      ESA

103

27

      JAXA

51

 
   Total Late Load

582

435

      Ballast/Filler foam

22

75

0

Total Dry Cargo

2201

1605

1150

Total Cargo Fluid + Dry

6596

7091

4557

Summary of the various types of cargo on ATV-3 23-Feb-12
Cargo Type TOTAL Sub-total Contents
COMPUTER RESOURCES 31.19    

C&DH-PCS

  19.34 Laptops, hard drives, power cables, etc.

PHOTO/TV EQUIPMENT

  11.85 Camera body, lens, camcorder, flash unit, etc.
CREW SUPPLIES (OC) 1100.4    

U.S. SUPPLIED FOOD (ENERGY)

  4.00 Food

CREW CARE PACKAGES

  44.21 Food and personal items/gifts

FLIGHT CREW EQUIPMENT

  311.96 Clothes, hygiene, office supplies, tools, flashlights, etc.

FOOD SUPPLY SYSTEM

  718.40 Food

SODF

  21.83 On-orbit Crew Procedures
EVA EQUIPMENT 26.22    
UTILIZATION 156.84    

ESA UTILIZATION

  40.03 Altea, ESEM boards, Biolab (gloves, gas), Energy

JAXA UTILIZATION

  29.04 Biological rhythms experiment, Space Sound, Marangoni Inside Core

US UTILIZATION

  87.77 Human Research Facility supplies (gauze, wipes, sample kits), LEGO (airplane, gyro, spinner), Nanoracks, MELFI, Ultrasound 2, VO2 Max (PIG in a Blanket)

VEHICLE HARDWARE (OB)

638.56    

ANDROGYNOUS PERIPHERAL DOCKING SYSTEM (APDS)

  2.32 ESA (PCE bag)

CHECS

  29.62 Exercise equipment

CONTROLLER PANEL ASSEMBLY

  2.66 Packaging

C&T VIDEO

  17.15 2 colour TV cameras

ECLSS

  320.42 Life support equipment (ARFTA, Solid waste containers, Multifiltration Bed ORU,  Fire Cartridge Assembly)

ECLSS WATER RECOVERY MANAGEMENT

  54.21 ACTEX unit

ELECTRICAL POWER SYSTEM (EPS)

  139.73 50 Lamp Housing Assemblies, Sequential Shunt Unit (SSU)

ESA HARDWARE

  45.04 CFA,CMU, WOOV, ASD/DSD caps, etc

ESA PAO

  12.73 Various items for PR/Comm activities

FLIGHT CREW EQUIPMENT

  7.94 Beverage Adapter, Hair clipper hose, tools, etc
STRUC & MECH   0.04 UBNT syringe barrel assy
U.S. WASTE   6.71 Trash bags

TOTAL

1953.21 *  
TOTAL cargo on ATV-3 2201.81    

And — Yes! — ATV-3 will carry a new Reentry Breakup Recorder (REBR) into orbit — and, indeed, back down from orbit, too! More details in a later post on this fascinating device.

Editor’s note: Sincere thanks for input on this post to M. Cislaghi, ATV-3 Mission Manager, B. Bekooy, ESA/ESTEC – ATV programme, K. MacDonell – ATV Cargo Integration Engineer and M. Steinkopf – ATV Mission Director, ATV-CC.